Fleetguard NEW HF6119 Hydraulic Filter Spin-On 1-12 Case IH New Holland IH 0810

Fleetguard Hydraulic Filter — Part Number HF6119

Brand: Fleetguard | Condition: New Old Stock (NOS)

Genuine Fleetguard HF6119 spin-on hydraulic filter, new old stock from long-term warehouse storage. This is a low-pressure hydraulic spin-on — a short, compact can at roughly 3.7 in diameter and under 4 in tall, with a 1-12 UNF-2B thread. It serves International Harvester, Case-IH, Ford and New Holland equipment, crossing to IH/Navistar 404886R1 and Ford/New Holland 178562, and carries an unusually broad aftermarket interchange for a filter this size.

Hydraulic filtration protects the most expensive and least forgiving parts of the machine. Pumps, control valves and cylinders run tight clearances on fluid film, and the wear metal, casting sand and seal debris that circulate in a neglected system grind those clearances open slowly and invisibly. By the time a hydraulic system is noticeably weak, the damage has already been done. The filter is the cheapest component in the circuit and the only thing protecting everything else in it.

Condition Details

New old stock. The filter itself is unused and unopened, straight from original storage. As with all warehouse-stored inventory, the box may show shelf wear, dust, fading, price stickers, scuffs or minor crushing from stacking. The filter can has been kept sealed; any exterior marking described above refers to the packaging, not to the filtration element. Threads and gasket are new and have never been installed. Please review all photos, as what is pictured is what you will receive.

Specifications

• Part Number: HF6119
• Type: Hydraulic filter, spin-on, low pressure
• Thread Size: 1-12 UNF-2B
• Overall Height: 3.84 in (97.6 mm) per Fleetguard — the Baldwin equivalent is published at 3.25 in (82.6 mm)
• Outside Diameter: approximately 3.69 in (93.7 mm)
• Gasket Inside Diameter: 2.46 in
• Gasket Outside Diameter: 2.83 in
• Gasket: integral, pre-installed
• Filtration Rating: approximately 18 micron nominal / 40 micron absolute (published for the Baldwin BT357 equivalent)
• Bypass Valve: 2 PSID (published for the Baldwin BT357 equivalent)
• Mounting: standard spin-on, hand tighten plus 3/4 turn after gasket contact

The micron rating and bypass setting above come from the Baldwin cross rather than from Fleetguard's own published data, and are given as a guide to the filter's class rather than as Fleetguard specifications. The thread, gasket dimensions and Fleetguard height are Fleetguard's own figures.

Superseded & Cross Reference Part Numbers

Fleetguard HF6119 interchanges with the following. Always confirm against your own application guide before ordering.

OEM numbers

• International Harvester / Navistar: 404886R1, 404886-R91
• Case-IH: 404886R1
• Ford: 178562
• New Holland: 178562
• GMC: 25012354
• Ariens: 31146
• Cushman: 522200

Aftermarket

• Baldwin: BT357
• Donaldson: P551756, P779667
• Wix: 51247
• NAPA: 1247
• Hastings: HF737, P737
• Fram: P6485
• Purolator: PER312H
• AC Delco: PF1074
• Luber-finer: 1617526, LFP2303
• Champion Laboratories: 1617526, LFP2303
• Hi-Fi Filter: SH56169
• Carquest: 85247
• Big A: 2189, 92247

Features

• Low-pressure hydraulic spin-on, correct for return-line and charge-circuit filtration rather than high-pressure duty
• Low 2 PSID bypass setting, appropriate to a low-pressure circuit where a high bypass would restrict flow
• Approximately 18 micron nominal / 40 micron absolute filtration, matched to the OEM specification for these applications
• Compact 3.7 in diameter, sub-4 in can that fits tight installations where a full-size filter will not
• 1-12 UNF-2B thread — note this is a coarser pitch than the 1-16 used on many engine oil filters of similar diameter
• Integral gasket pre-fitted to the baseplate, correctly sized — no separate seal to source or lose
• Built by Fleetguard, the filtration division of Cummins, to heavy-duty rather than light-automotive standards
• Broad interchange — one part number covers International, Case-IH, Ford, New Holland, GMC, Ariens and Cushman equipment

Application

Fits equipment using the 1-12 low-pressure hydraulic spin-on, including:

• International Harvester / Navistar — under OEM 404886R1 and 404886-R91
• Case-IH — under OEM 404886R1
• Ford and New Holland — under OEM 178562
• GMC — under OEM 25012354
• Ariens — under OEM 31146
• Cushman — under OEM 522200

Baldwin catalogues the equivalent filter for International and New Holland equipment across agriculture, construction, mining, marine, oil and gas, and compressor applications, which gives some sense of how widely this small hydraulic spin-on was deployed.

Buyers should confirm fitment against the cross-reference list and their own application guide, as hydraulic filter head configurations vary by machine and model year.

Why Choose Fleetguard?

Fleetguard is the filtration division of Cummins and has built heavy-duty filtration since 1958. Fleetguard filters are validated against the same engineering standards as Cummins' own engines and are factory fill on a large share of the world's heavy-duty diesels and machinery. On a hydraulic filter the engineering shows up where you cannot see it: media grade and area, pleat stability under flow, can burst strength, and the bypass valve setting. A cheap hydraulic filter that collapses does not merely stop filtering — it sends its own media downstream into the pump.

Returns

We accept returns through eBay's standard 30-day return request process. If the part is not what you need, simply open a return request through eBay within 30 days of delivery and we will take care of it.

Thank you for looking. We are a small parts business and we take real care in identifying, describing and packing every item we list. If anything about this part is unclear, or if you want additional photos or measurements before you buy, please message us — we would much rather answer a question up front than have you receive something that is not right for your machine.

If there is any problem at all with your order, please contact us first and give us the chance to make it right before leaving feedback. We respond quickly and we will resolve it.

QBS Parts, Inc — Gardena, CA